Schedule changes
Version manual upload imoc10 Oct. 16, 2025
We released a new schedule version!
Version check upload Oct. 16, 2025
We released a new schedule version!
Version UplaodTest Oct. 14, 2025
We released a new schedule version!
Version keynote url sidd Sept. 15, 2025
We released a new schedule version!
Version ma vendor presentation Sept. 15, 2025
We released a new schedule version!
Version bio update Sept. 9, 2025
We released a new schedule version!
Version picture update Sept. 9, 2025
We released a new schedule version!
Version Plenary Session Speakers Sept. 9, 2025
We released a new schedule version!
Version orthogonal Sept. 8, 2025
We released a new schedule version!
Version OM Vendor Sept. 8, 2025
We released a new schedule version!
Version Test new tutorial link without login Sept. 7, 2025
We released a new schedule version!
Version add julihub details Sept. 3, 2025
We released a new schedule version!
Version Add all session chair Sept. 2, 2025
We released a new schedule version!
Version Add Session Chairs Sept. 2, 2025
We released a new schedule version!
We have new sessions!
- “Session Chair” by Peter Fritzson
- “Session Chair” by Dag Brück
- “Session Chair” by Christopher Laughman
- “Session Chair” by Martin Otter
- “Session Chair” by Alberto Leva
- “Session Chair” by Stefan Wischhusen
- “Session Chair” by Christian Bertsch
- “Session Chair” by Yang Ji
- “Session Chair” by Ulf Christian Müller
- “Session Chair” by Rui Gao
- “Session Chair” by Jiri Kofranek
- “Session Chair” by Benoît Caillaud
- “Session Chair” by Christian Schulze
- “Session Chair” by Franciscus L. J. van der Linden
- “Session Chair” by Jakub Wysocki
- “Session Chair” by Johan Andreasson
- “Session Chair” by Wangda Zuo
- “Session Chair” by Daeoh Kang
- “Session Chair” by Roger Eivind Stenbro
- “Session Chair” by Hubertus Tummescheit
- “Session Chair” by Joy El Feghali
- “Session Chair” by Scott Bortoff
- “Session Chair” by Robert Hällqvist
- “Session Chair” by Tobias Bellmann
- “Session Chair” by Luigi Vanfretti
- “Session Chair” by Lars Mikelsons
We had to move some sessions, so if you were planning on seeing them, check their new dates or locations:
- “Session Chair” by Dirk Zimmer (Sept. 10, 2025, 2:10 p.m. → Sept. 10, 2025, 2:09 p.m.)
- “On the precise and efficient representation of industrialcontrollers in Modelica” by Alberto Leva (Sept. 10, 2025, 2:11 p.m. → Sept. 10, 2025, 2:10 p.m.)
- “Session Chair” by Francesco Casella (Sept. 10, 2025, 2:10 p.m. → Sept. 10, 2025, 2:09 p.m.)
- “Session Chair” by Bernhard Bachmann (Sept. 9, 2025, 10:15 a.m. → Sept. 9, 2025, 10:19 a.m.)
- “Benchmarking the Modular Structural Analysis Algorithm” by Benoît Caillaud, Albert Benveniste, Mathias Malandain (Sept. 10, 2025, 2:11 p.m. → Sept. 10, 2025, 2:10 p.m.)
- “Race Car Braking System Thermal Model for Real Time Use ina Driving Simulator” by Massimo Stellato, Alberto Momesso, Theodor Ensbury, Alessandro Picarelli (Sept. 10, 2025, 2:11 p.m. → Sept. 10, 2025, 2:10 p.m.)
- “Session Chair” by Kilian Link (Sept. 10, 2025, 2:10 p.m. → Sept. 10, 2025, 2:09 p.m.)
- “Dynamic modelling of an Ammonia to Power application athigh efficiency using a solid oxide fuel cell system” by Michele Bolognese, Emanuele Martinelli, Luca Pratticò, Matteo Testi (Sept. 10, 2025, 2:11 p.m. → Sept. 10, 2025, 2:10 p.m.)
- “MBSE using SSP and SysML for Collaborative Development: AnOpen-source ADAS Use Case” by Hasan Esen, Nicolas Ochoa Lleras, Ludwig Friedmann (Sept. 10, 2025, 2:11 p.m. → Sept. 10, 2025, 2:10 p.m.)
Version Typo fixes Sept. 1, 2025
We released a new schedule version!
Version SessionChairTest2 Sept. 1, 2025
We released a new schedule version!
We have new sessions!
We had to move some sessions, so if you were planning on seeing them, check their new dates or locations:
- “On the precise and efficient representation of industrialcontrollers in Modelica” by Alberto Leva (Sept. 10, 2025, 2:10 p.m. → Sept. 10, 2025, 2:11 p.m.)
- “Race Car Braking System Thermal Model for Real Time Use ina Driving Simulator” by Massimo Stellato, Alberto Momesso, Theodor Ensbury, Alessandro Picarelli (Sept. 10, 2025, 2:10 p.m. → Sept. 10, 2025, 2:11 p.m.)
- “Benchmarking the Modular Structural Analysis Algorithm” by Benoît Caillaud, Albert Benveniste, Mathias Malandain (Sept. 10, 2025, 2:10 p.m. → Sept. 10, 2025, 2:11 p.m.)
- “Dynamic modelling of an Ammonia to Power application athigh efficiency using a solid oxide fuel cell system” by Michele Bolognese, Emanuele Martinelli, Luca Pratticò, Matteo Testi (Sept. 10, 2025, 2:10 p.m. → Sept. 10, 2025, 2:11 p.m.)
- “MBSE using SSP and SysML for Collaborative Development: AnOpen-source ADAS Use Case” by Hasan Esen, Nicolas Ochoa Lleras, Ludwig Friedmann (Sept. 10, 2025, 2:10 p.m. → Sept. 10, 2025, 2:11 p.m.)
Version Session Chair Display Test Sept. 1, 2025
We released a new schedule version!
We have a new session: “Session Chair” by Bernhard Bachmann.
Version All items added Aug. 30, 2025
We released a new schedule version!
We have new sessions!
- “MathWorks” by Weiwu Li
- “LTX” by Leo Gall
- “Welcome Reception”
- “XRG” by Stefan Wischhusen
- “Tongyuan” by Fanli Zhou
- “orthogonal” by Yang Ji
- “Building Trust in Simulation-Based Engineering: Credible Simulations with easySSP and the SSP Standard” by Peter Lobner
- “OpenModelica” by Francesco Casella, Adrian Pop, Adeel Asghar
- “Dassault Systèmes” by Quentin Prieto, Dag Brück
- “Claytex” by Alessandro Picarelli
- “Modelon” by Johan Andreasson, Johan Windahl
- “JuliaHub” by Christopher Rackauckas, Michael Tiller
- “Wolfram” by Jan Brugard, Ankit Naik
Version breaks add correct markdown header Aug. 30, 2025
We released a new schedule version!
Version add all lunch, coffe, poster Aug. 30, 2025
We released a new schedule version!
We have new sessions!
Version poster break Aug. 30, 2025
We released a new schedule version!
We had to move some sessions, so if you were planning on seeing them, check their new dates or locations:
- “Coffee Break with Poster Presentations” (Main entrance → Other Rooms)
- “Coffee Break with Poster Presentations” (Sept. 9, 2025, 10 a.m., Poster Exhibition → Sept. 8, 2025, 2:45 p.m., Other Rooms)
- “Coffee Break with Poster Presentations” (Sept. 9, 2025, 10 a.m., Sponsor Exhibition → Sept. 9, 2025, 2:15 p.m., Other Rooms)
Version new: Other Rooms Aug. 30, 2025
We released a new schedule version!
We had to move some sessions, so if you were planning on seeing them, check their new dates or locations:
- “Tutorials in parallel” (Tutorials → Other Rooms)
- “Tutorial continued” (Tutorials → Other Rooms)
Version Tutorial Test Final 2 Aug. 30, 2025
We released a new schedule version!
We have a new session: “Tutorial continued”.
Version Tutorial Test Final 1 Aug. 30, 2025
We released a new schedule version!
Version Tutorial Test Final Aug. 30, 2025
We released a new schedule version!
Version tutorial test 3 Aug. 30, 2025
We released a new schedule version!
Sadly, we had to cancel a session: “eFMI®: A beginner’s overview and hands on” by Christoff Bürger
Version tutorial test 2 Aug. 30, 2025
We released a new schedule version!
We have a new session: “eFMI®: A beginner’s overview and hands on” by Christoff Bürger.
Version tutorial test Aug. 30, 2025
We released a new schedule version!
We have a new session: “Tutorials in parallel”.
Version Add all plenary sessions Aug. 30, 2025
We released a new schedule version!
We have new sessions!
Version Pseudo blocks added Aug. 30, 2025
We released a new schedule version!
Version Ulf added Aug. 25, 2025
We released a new schedule version!
Version Updated IUP Aug. 25, 2025
We released a new schedule version!
We had to move some sessions, so if you were planning on seeing them, check their new dates or locations:
- “Optimized usage of heat recovery potentials in modernliquid cooled data centers to minimize their environmentalimpact” by Timo Schubert, Manuel Gräber, Dominik Hering (Sept. 10, 2025, 11:25 a.m. → Sept. 10, 2025, 11 a.m.)
- “Development of scalable rule-based temperature feedback controls for energy-efficient condenser water loops in semiconductor factories” by Myoungsoo Kim, Hyungsik Um, Minjun Song, Sejun Park, Byeongyeob Choi, Jonghan Oh, Moonseok Kim (Sept. 10, 2025, 12:15 p.m. → Sept. 10, 2025, 11:50 a.m.)
- “Optimal Energy Management of a Biogas Plant Using Model Predictive Control and Forecast-Driven Optimization” by Carlo Miano (Sept. 10, 2025, 11:50 a.m. → Sept. 10, 2025, 11:25 a.m.)
Version Add comments Aug. 25, 2025
We released a new schedule version!
Version Tuesday Proposal Complete Aug. 25, 2025
We released a new schedule version!
We have new sessions!
- “Panel discussion on the value of open standards” by Hubertus Tummescheit
- “Conference Opening” by Ulf Christian Müller
- “Modelica and FMI News by Dirk Zimmer” by Dirk Zimmer
- “Keynote of Mishra Siddhartha on Physics-Informed AI” by Mishra Siddhartha
- “Coffee Break with Poster Presentations”
- “Conference Dinner”
- “Individual transfer to Lucerne”
- “Coffee Break with Poster Presentations”
- “Coffee Break with Poster Presentations”
Version Session Wednesday Complete. MISSING DATA: IUP Submission Model Predictive Controller Aug. 24, 2025
We released a new schedule version!
We have new sessions!
- “Development of scalable rule-based temperature feedback controls for energy-efficient condenser water loops in semiconductor factories” by Myoungsoo Kim, Hyungsik Um, Minjun Song, Sejun Park, Byeongyeob Choi, Jonghan Oh, Moonseok Kim
- “Shared sea-environment definition and realization formaritime and offshore co-simulations” by Karl Gunnar Aarsæther, Stian Skjong
- “Frost/Defrost Models for Air-Source Heat Pumps withRetained Water Refreezing Considered” by Jiacheng Ma, Matthis Thorade
- “Direct Ammonia Solid Oxide Fuel Cell Stack: Modelling and Experimental Validation” by Michele Bolognese, Emanuele Martinelli, Matteo Testi, Nirmala Nirmala, Narges Ataollahi
- “Benchmarking the Modular Structural Analysis Algorithm” by Benoît Caillaud, Albert Benveniste, Mathias Malandain
- “Development of a Multi-Physical Simulation Platform for Durability Prediction for Hyundai & Kia Electric Vehicles” by Alessandro Picarelli, Jaewung Jung, David Briant, Kadir Sahin, Garron Fish, Victor-Marie Lebrun, Christopher Stromberger, Arnaud Colleoni, Quentin Prieto
- “MBSE using SSP and SysML for Collaborative Development: AnOpen-source ADAS Use Case” by Hasan Esen, Nicolas Ochoa Lleras, Ludwig Friedmann
- “Diagnosing Newton’s Solver Convergence Failures in theInitialization of Modelica Models” by Francesco Casella, Karim Abdelhak, Bernhard Bachmann, Philip Hannebohm, Teus van der Stelt
- “Facilitating the use of Physics-Based Simulations onEmbedded Devices by running FMUs from MicroPython” by Tom Reynaud, Erfan Enferad, Maxime Lefrancois
- “Optimizing Assemblies of FMUs” by Nicolas Laurent
- “Integration of Geometric Tolerance Analysis in SystemSimulations via Functional Mock-up Units” by Christoph Steinmann, Konstantin Wrede, Jens Schirmer, Jens Lienig
- “FMI Meets SystemC: A Framework for Cross-Tool Virtual Prototyping” by Nils Bosbach, Meik Schmidt, Lukas Jünger, Matthias Berthold, Rainer Leupers
- “A Dynamic Analysis of Refrigerant Mass in Vapor CompressionCycles” by Christopher Laughman, Scott Bortoff, Vedang Deshpande, Hongtao Qiao
- “Optimized usage of heat recovery potentials in modernliquid cooled data centers to minimize their environmentalimpact” by Timo Schubert, Manuel Gräber, Dominik Hering
- “Model-Based Control Design for a Multi-Stacks SOC System” by Axelle Hégo, Félix Bosio, Sylvain Mathonnière
- “Modelica2Pyomo: a tool to translate Modelica models intoPyomo optimization models” by Francesco Casella, Matteo Luigi De Pascali, Lorenz T. Biegler, Emanuele Martelli
- “Optimization with FMI and CasADi: Analysis in IndustrialApplications” by Christian Bertsch, Fabian Jarmolowitz, Andreas Pfeiffer, Christoph Winter
- “The Fundamental Modeling Practices and Specifications tosupport the Preservation and Reuse of Analytical Simulations” by Mark Williams, Hubertus Tummescheit, Ajaykumar Mst, Jose María Alvarez-Rodríguez
- “Race Car Braking System Thermal Model for Real Time Use ina Driving Simulator” by Massimo Stellato, Alberto Momesso, Theodor Ensbury, Alessandro Picarelli
- “Solid-State Battery-Systems and Thermal Management forElectric Long-Distance Buses” by Markus Pollak, Jan Friedrich Hellmuth, Andreas Schulte, Wilhelm Tegethoff, Jürgen Köhler
- “Decreasing Risk in the Design of Large Coupled Systems viaCo-Simulation-Based Optimization and Adaptive Stress Testing” by Severin Sadjina, Lars Kyllingstad, Stian Skjong
- “Dynamic modelling of an Ammonia to Power application athigh efficiency using a solid oxide fuel cell system” by Michele Bolognese, Emanuele Martinelli, Luca Pratticò, Matteo Testi
- “Introducing the NewLib Library and its application tomulti-level, large-scale solar field models” by Igor Belot, Francois Nepveu, Pierre Garcia, Nathan Fournier, Teddy Chedid, Etienne Letournel, Pierre Delmas, Alexis Gonnelle, Guillaume Raigné
- “Context-Oriented Modelica for Advanced VariabilityManagement” by Christian Gutsche, Zizhe Wang, Uwe Aßmann
- “Constant Time Causalization using Resizable Arrays” by Karim Abdelhak, Bernhard Bachmann
- “Accuracy and assurance of co-simulations in marine lifting operations” by Roger Eivind Stenbro, Hee Jong Park, Siegfried Eisinger
- “On the precise and efficient representation of industrialcontrollers in Modelica” by Alberto Leva
- “Centrifugal Pump Model of the DLR Thermofluid Stream Library” by Raphael Gebhart, Martin Düsing, Niels Weber, Franciscus L. J. van der Linden
- “Quasi-Periodic Feedforward Control Based on Inverse ModelTabled FFT” by Tilman Bünte, Jakub Tobolář
- “Transmission Control Unit Use Case for Virtual ECUs andSSP-based Collaborative Development” by Hasan Esen, Pierre Mai, Nicolas Ochoa Lleras
- “Modelling and Impact of Hydraulic Short Circuit Operationin Pumped Hydro Energy Storage” by Inga Beyers, Astrid Bensmann, Lukas Krebeck, Richard Hanke-Rauschenbach
- “The FlightControl library for aircraft control design applications” by Reiko Müller
- “An Open-Source Industrial-Grade Collection of Renewable Energy Source Generic Models in Modelica Language” by Joy El Feghali, Louis Garbay, Adrien Guironnet, Philibert Parquier, Marco Chiaramello, Martin Franke, Luka Plavec
- “Validation of Dynamic Simulation Models using MetamorphicTesting and Given-When-Then Patterns” by Gaadha Sudheerbabu, Dragos Truscan, Kristian Klemets, Mikael Manngård
- “Br(e)aking the Boundaries of Physical Simulation Models: Neural Functional Mock-up Units for Modeling the Automotive Braking System” by Tobias Thummerer, Lars Mikelsons, Fabian Jarmolowitz, Daniel Sommer
- “Master controller for offshore wind power and hybrid grids” by Rüdiger Franke, Marcin Bartosz, Rasmus Nyström
- “Neural Network-Based Reduced-Order Model of a Large-Scale CO₂ Heat Pump for Real-Time Simulation and Digital Twin Applications” by Kamran Iranshahi, Jakob Hermeler
- “VDCWorkbench: A Vehicle Dynamics Control Test & Evaluation Library for Model and AI-based Control Approaches” by Jonathan Brembeck, Ricardo Pinto de Castro, Christoph Winter, Jakub Tobolář, Johannes Ultsch, Kenan Ahmic
- “Automation Nation: Taming Complex V&V Workflows” by Robert Braun, Erik Rosenlund, Robert Hällqvist, Petter Krus
- “The Value of Enforcing a Strict Modeling Methodology withinModelica” by Dirk Zimmer
- “ShipSIM: A Modelica Library for Ship Maneuverability, Modeling and Simulation” by Basilio Puente Varela, Maria Dolores Fernández Ballesteros, Maria Isabel Lamas Galdo, Luis Carral
- “Optimal Energy Management of a Biogas Plant Using Model Predictive Control and Forecast-Driven Optimization” by Carlo Miano
- “Modiator - A Web App for Modelica Simulation” by Martin Otter, Hilding Elmqvist
- “Enhancing Collocation-Based Dynamic Optimization through Adaptive Mesh Refinement” by Linus Langenkamp, Bernhard Bachmann
- “Modelica driven development of the thermal managementcontrol system for a zero emission yacht” by Johannes Brunnemann, Boudewijn Van Groos, Alje Van Dam, Carsten von Ohlen, Finn Theel, Jörg Eiden
- “A Study on Vehicle Suspension Loads Prediction Method Based on Hybrid Road Simulation using Modelica Library and FMI” by Minsu Hyun
- “Context-Oriented Equation-based Modeling inModelingToolkit.jl” by Christian Gutsche, Zizhe Wang, Volodymyr Prokopets, Uwe Aßmann, Christoph Seidl, Sebastian Götz
- “Cross-Company Collaborative Model-Based Development usingFMI3.0 and SSP2.0” by Dai Araki
- “Resizable Arrays in Object-Oriented Modeling” by Martin Otter, Hilding Elmqvist
- “Further Application of Modelica-Based Nuclear Power SystemSimulation: Tasks in Different Scenarios Driven by Modeland Data” by Xiang Wang, Ao Zhang
- “Hybrid Simulation Models for Embedded Applications: AModelica and eFMI approach” by Tobias Kamp, Christoff Bürger, Johannes Rein, Jonathan Brembeck
- “Dynamic Simulation of a PEM Electrolysis System” by Markus Pollak, André Thüring, Wilhelm Tegethoff
- “Simulation of Embodied Cyber Physical System Based onModelica/MWORKS: A Case Study of Intelligent UnmannedSurface Vessel” by Zhiguo Zhou, Xuehua Zhou, Lin Du, Peiquan Ma, Xiang Wang, Ying Chen, Mingjia Liu, Tengyue Wang, Lixin Hui, Cun Zeng
Version Sessions Tuesday Complete Aug. 24, 2025
We released a new schedule version!
We have new sessions!
- “Chemical 2.0 (Free open-source Modelica library)” by Marek Matejak
- “Integration of systems engineering and simulation based onstandards: The needs, challenges and solutions from anindustrial perspective” by Hans-Martin Heinkel, Daniel Krems, Thomas Schwartzkopff
- “Development of a Refrigerant Mixture Package for DynamicSimulation of Auto-Cascade Refrigeration: A Case Study withR23/R134a” by Rohit Dhumane, Dan Gorman, Rajkumar K S, Dongping Huang
- “LS-SA: Developing an FMI layered standard for holistic & efficient sensitivity analysis of FMUs” by Tobias Thummerer, Lars Mikelsons, Hans Olsson, Chen Song, Torsten Blochwitz, Julia Gundermann
- “Modelica Meets ASHRAE: Towards A Digital Standard forBuilding Control” by Michael Wetter, Yan Chen, Karthik Devaprasad, Paul Ehrlich, Antoine Gautier, Jianjun Hu, Anand Prakash, Marco Pritoni
- “Traceability and Support of Modeling & Simulation usingSSP-Traceability Layered Standard” by Dag Brück, Hans-Martin Heinkel, Pierre Mai, Peter Lobner, Antoine Vandamme
- “OpenSCALING: A Saab Aeronautics Perspective” by Erik Rosenlund, Robert Hällqvist, Raghu Chaitanya Munjulury
- “Combining static and dynamic optimization approaches for path planning, with collision avoidance” by Clément Coïc, Marco Masannek
- “Prototypical Control for the Digital Twin of AircraftEnvironmental Control System” by Corentin Lepais, Dirk Zimmer
- “Towards a Common Standard for Uncertainty Quantification” by Martin Otter, Amin Bajand, Lena Buffoni, Hans Olsson, Elmir Nahodovic, Antoine Vandamme, Adrian Pop, Robert Hällqvist, Oliver Lenord, L. Viktor Larsson
- “TAeZoSysPro: A Modelica Library for Thermal Aeraulic andBuildings Thermodynamics Calculations” by Pascal Borel, Rafik Moulouel, Antoine Chupin, Félix Marsollier
- “Yet Another Residential District Simulator: yards forController Development in the Residential Built Environment” by Lucas Bex, Lieve Helsen, Muhammad Hafeez Saeed, Lucas Verleyen, Geert Deconinck
- “Design and Simulation Validation of Steam Power SystemsBased on MBSE” by Ruirui Zeng, Wei Liu, Lei Huang, Qi Liu, Hui Gao, Jian Liu, Xingjian Han
- “Automatic Modelica Package and Model Generation from Templates and Data Files with Python, Exemplified with URDF” by Antoine Pignède, Carsten Oldemeyer
- “FMI Layered Standard for Network Communication:Applications in Networked ECU Development” by Christian Bertsch, Kahramon Jumayev, Andreas Junghanns, Pierre R. Mai, Benedikt Menne, Masoud Najafi, Jan Ribbe, Klaus Schuch, Markus Süvern, Patrick Täuber, Tim Pfitzer
- “An innovative heterogeneous modeling approach to build acooling system for battery thermal management with commonfluid properties involving FMI terminals” by Karim Besbes
- “Pharmacolibrary - Free Library to Model Pharmacology” by Marek Matejak, Tomas Kulhanek, Filip Jezek, Jiri Kofranek, Stef Rommes
- “Bridging the gap between System Engineering and Simulation,applied to collaborative design of Aircraft Systems” by Eric THOMAS
- “Modelling, Simulation and Validation of thermal propagation for 3D discretized battery cells in Modelica” by Finn van Ginneken, Alexander Busch
- “FMI Standard and Airbus Needs, Usages and Expectations FullVersion” by Tahina Bezanahary
- “Enhancing Large-Scale Power Systems Simulations throughFunctional Mockup Unit-based Grid-Forming Inverter Models” by Luigi Vanfretti, Sagnik Basumallik, Mohammad Ali Dashtaki, Ziang Zhang, Reza Pourramezan, Hossein Hooshyar
- “Collaborative Digital Twin Development for Railway Brakingand Traction Applications” by Gerhard Hippmann, Blas Blanco Mula
- “Aspects and Ideas for the FMI-based Modeling of RailwayDigital Twins” by Andreas Heckmann, Alexander Poßeckert, Vijaya-Bhaskar Adusumalli
- “CDL-PLC translator: From Modelica HVAC control design toIEC 61131 PLC implementation” by Michael Wetter, Karl Walther, Jianjun Hu, Anand Prakash
- “Towards a Credible System Simulation Architectureapplicable to Heat Pump Systems using Modelica, FMI and SSP” by Dag Brück, Peter Lobner, Oliver Lenord
- “A Generic Non-Miscible Liquid-Gas Medium Model in Modelicawith Analysis of Incompressibility Assumptions” by Hubert Blervaque, Félix Marsollier
- “Modelling Aquifer Thermal Energy Storage (ATES) System withBuoyancy Flow” by Markus Gillner, Arne Speerforck
- “Modelica FMI based hybrid reinforcement learning enhanced trajectory planning for an ADR scenario for combined control of a satellite with a 7-axis robotic arm using Modelica/FMI” by Matthias Reiner
- “Development and Experimental Validation of an UnglazedPhotovoltaic-Thermal Collector Modelica Model that onlyneeds Datasheet Parameters” by Lone Meertens, Jelger Jansen, Lieve Helsen
- “Integration of Physical and AI Models Using Open andInteroperable Standards: A Model-Based Methodology forAutonomous Robot Development” by Sebastian Rojas-Ordoñez, Mikel Segura, Ekaitz Zulueta
Version Sessions Tuesday Aug. 24, 2025
We released a new schedule version!
We have new sessions!
- “Model Disambiguation Technology in MWORKS.Sysplorer” by Qi Liu, Liping Chen, Fanli Zhou, Zhipeng Chen, Zhichao Huang, Chong Zhou, Yinqi Chen
- “Towards Integration of PeN-ODEs in a Modelica-based workflow” by Lars Mikelsons, Andreas Hofmann
- “How Modelica Provides Value to the Building Industry: Flexible Plant Design from Traditional Chiller Plants to Hybrid GSHP Systems” by Victor Braciszewski
- “Implicit Unit Conversion in Modelica” by Henrik Tidefelt, Quentin Lambert
- “Status of the SMArtInt Library: Simple Modelica Artificial Intelligence Interface” by Tim Jonas Hanke, Johannes Brunnemann, Jörg Eiden, Robert Flesch
- “System Cost of Hydrogen Optimization & Sub-HourlyComparative Analysis of PEM and Alkaline ElectrolyzerOperation” by Nicholas Pilot, Garrett Doty, James Harper, Behrooz Motealleh
- “On the challenges of large-scale simulation platforms andour solution to overcome them” by Tomas Eriksson, Johan Simonsson, Andre Yamashita
- “Improved Unit Inference and Checking in Modelica” by Hans Olsson
- “Data Reconciliation for Industrial Experiments” by Baptiste Mazurié, Audrey Jardin, Pascal Borel, Didier Boldo, Frans Davelaar, Luis Corona Mesa-Moles
- “Process-based Life-Cycle Sustainability Analysis of Integrated Solid Waste Management Systems: A Decision-Support Platform using OpenModelica” by Julie Dutoit, Manuela Goulart, Mae McKenna, Jaroslav Hemrle, Jana Lukic
- “Efficient Training of Physics-enhanced Neural ODEs via Direct Collocation and Nonlinear Programming” by Linus Langenkamp, Bernhard Bachmann, Philip Hannebohm
- “Zero-Shot Parameter Estimation of Modelica Models usingPatch Transformer Networks” by Ankush Chakrabarty, Christopher Laughman, Marco Forgione, Dario Piga, Alberto Bemporad
Version initial test Aug. 24, 2025
We released a new schedule version!
We have new sessions!
- “Analytical Treatment of Hollow Toroid Flux Tubes” by Herbert Schmidt
- “Master controller concept for power flexible energy systems” by Thomas Egsgaard Kallesen, Søren Waagø Christiansen, Rene Just Nielsen
- “Liaison: an open-source tool for distributed co-simulations” by Luis Sanchez-Heres, Fredrik Olsson, Jan Östh
- “A Tool for the Implementation of Open Neural NetworkExchange Models in Functional Mockup Units” by Michele Bolognese, Michele Urbani, Luca Pratticò, Matteo Testi
- “Comparing the Predictive Event Handling Algorithm LookAhead to Rollback and Early Return” by Felix Tischer, Simon Genser, Daniel Watzenig, Martin Benedikt
- “Expanding an Open-Source Modelica-Compliant Package ofGeneric Renewable Energy Source Models: Implementation ofthe REEC_D and REGC_B Models in Modelica and OpenIPSL” by Luigi Vanfretti, Srijita Bhattacharjee, Fernando Fachini
- “OpenIWPI: Open-Instance Wave-Phasor Interface Library forPower System Simulation Studies in Modelica” by Marcelo de Castro, Luigi Vanfretti
- “Input Smoothing for Faster Co-Simulation using FMI” by Erik Henningsson, Christian Schulze, Dag Brück, Elmir Nahodovic, Manuel Gräber, Oliver Lenord, Julius Aka
Version 0.1 Aug. 23, 2025
We released our first schedule!