Braskem
- Hydrodynamics Improvement of a Pelletizer Chamber Using Computational Fluid Dynamics
Luleå University of Technology
- Development of a CFD model for supersonic gas flow in a close-coupled atomizer
Politecnico di Torino
- Integration of Deep Learning and 3D CFD-PBM Model for Characterizing Mg(OH)2 Precipitation
SINTEF Industry, Process Technology, Flow Technology Group
- LES study and comparison with experiments of an axial-radial difuser configuration
Doctoral Candidate in the Multiphase Reactor group, Department Chemical Engineering and Chemistry, Eindhoven University of Technology
- Towards the understanding of the effect of non-Newtonian liquids in binary droplet collisions
SINTEF Industry
- A practical computational model to estimate PAH emission from furnaces
Prof. Dr.-Ing. Bernd Epple
Technical University of Darmstadt
Director of the Institute for Energy Systems and Technology (EST)
Otto-Berndt- Str. 2, 64287 Darmstadt / GERMANY
www.est.tu-darmstadt.de
- CFD-DEM simulation of chemical looping gasification of biogenic residues at 1 MWth scale
University of Luxembourg
- Unprecedented Insight into the Thermal Processing of a Blast Furnace
Høgskulen på Vestlandet
- Multiphase CFD model of plugging in cohesive slurries
Process Technology Department, SINTEF Industry, S.P. Andersens veg 15B, NO-7031 Trondheim, Norway
- Towards predicting cavitation collapse effects in Eulerian CFD model
Researcher and head of Area 3 "Simulation and Data Analyses" at K1-MET GmbH
- Understanding the continuous casting process with CFD modelling: the impact of microscopic dynamics on macroscopic scales
Technical University Darmstadt, Department of Mechanical Engineering, Institute for Energy Systems and Technology, Otto-Berndt-Str. 2, 64287 Darmstadt, Germany
- CFD-DEM simulation of chemical looping gasification of biogenic residues at 1 MWth scale
TechnipFMC Kraków
- A novel practical approach to cool down time thermal analyses in the oil and gas field
Power&Flow group, Eindhoven University of Technology, Eindhoven, The Netherlands
- Interface-resolved large eddy simulations of primary breakup in metal melt gas atomization
University of Alberta
- A Model of Freezing a Sea-Water Droplet Moving in a Cold Air
Eindhoven University of Technology
- 3D Bubble Shape Reconstruction from 2D Imagery Using CNNs
- On Model Assisted Measurements and Applications
Helmholtz-Zentrum Dresden-Rossendorf e.V., Bautzner Landstr. 400, 01328 Dresden, Germany
- MultiMorph - A Morphology-Adaptive Multifield Two-Fluid Model
Power and Flow Group, Department of Mechanical Engineering, Eindhoven University of Technology, Eindhoven, the Netherlands
- Solutal Marangoni flow around a growing hydrogen bubble: An immersed boundary simulation study
- CFD-DEM simulation of chemical looping gasification of biogenic residues at 1 MWth scale
Department for Industrial Furnaces and Heat Engineering, RWTH Aachen University
- CFD Simulation of Natural Gas and Hydrogen Oxyfuel Combustion: Comparison of kinetic mechanisms, combustion mechanisms and WSGG radiation models
- CFD simulation of organic dust deflagration in a vertical channel
K1-MET GmbH
- Simulation of melt flow in steel continuous casting considering transient clogging of submerged entry nozzle
Johannes Kepler University, K1-Met
- On the importance of numerical calibration in recurrence CFD simulations
Dr. Ir. J. Buist is researcher at the University of Applied Sciences Windesheim, Zwolle, The Netherlands
- CFD analysis of ultrasonic vibrations in enhancing recycled polymer extrusion efficiency
- Improving Flow Balancing: Employing GNF-X(M) for Predicting Flow Profile
- Enhancing Extrusion Performance: Macroscopic Analysis of Dispersive Mixing Sections
Research Manager at SINTEF, Flow Technology Group
- On a dissolving bubble plume from subsea release of CO2
SINTEF Industry, Process Technology Department
- Towards predicting cavitation collapse effects in Eulerian CFD model
CFD Application Specialist at Siemens - Fuel Cells and In-Cylinder simulations.
- Modelling of Flow through Multi-Phase Porous Media for Fuel Cells
- CFD-DEM simulation of chemical looping gasification of biogenic residues at 1 MWth scale
LTU and Swerim
- Optimization of mesh coupling between nozzle and mould for modelling turbulent flow during continuous casting
Jordin van 't Veld
Professorship for Polymer Engineering
Windesheim University of Applied Sciences
Zwolle, Campus 2, The Netherlands
j.h.van.t.veld@windesheim.nl
Jakob Buist
Professorship for Polymer Engineering
Windesheim University of Applied Sciences
Zwolle, Campus 2, The Netherlands
j.buist@windesheim.nl
- Improving Flow Balancing: Employing GNF-X(M) for Predicting Flow Profile
- CFD Simulation of Melt Flow in a Pilot Container Glass Furnace: Investigation of the Influence of the Ratio of Electrical Power to Burner Power on the Melt Flow
Siemens Digital Industries Software
- Modelling of Flow through Multi-Phase Porous Media for Fuel Cells
- A practical computational model to estimate PAH emission from furnaces
IFP Energies nouvelles, Rond-point de l'échangeur de Solaize, BP 3, 69360 Solaize, France
- Gas-Solid Injection in Fluidized Beds for Biomass Wastes Valorization
TechnipFMC, Al. Jana Pawła II 43b, 31-864 Kraków, POLAND
- A practical approach to calculating inertial forces for non-trivial subsea structures using CFD simulation
Department of Particulate Flow Modelling, Johannes Kepler University, Austria
- Investigation of submerged massive gas injection into liquid: numerical simulations and experimental observations
- Single bubble dynamics under the influence of Marangoni force
NORCE
- Modeling a pilot furnace for manganese alloys.
PRINCIPIA, EDF, EIFER
- CFD simulation of the filling of a high-pressure hydrogen tank
Samancor Chrome, University of Pretoria
- Modelling Effects of Lancing into Process Material Through Furnace Tap-Holes
Since 2012 I am employed at the Reactor Engineering Division of Jožef Stefan Institute, Ljubljana, Slovenia. Major research interests include computational fluid dynamics of flows relevant for safety of nuclear reactors, focusing on modelling of two-phase flows.
- MultiMorph - A Morphology-Adaptive Multifield Two-Fluid Model
Program Manager, Multiphase
Siemens Industry Software Pvt Ltd.
PhD, University of Utah
- Modelling of Flow through Multi-Phase Porous Media for Fuel Cells
Department for Industrial Furnaces and Heat Engineering, RWTH Aachen University
- Comparison of dimethyl ether and natural gas combustion in a swirl-stabilized industrial burner using CFD simulations
Department for Industrial Furnaces and Heat Engineering, RWTH Aachen University
- Numerical modeling of the submerged arc furnace
- CFD Simulation of Melt Flow in a Pilot Container Glass Furnace: Investigation of the Influence of the Ratio of Electrical Power to Burner Power on the Melt Flow
- A CFD parametric study for the optimized catalyst layer’s thickness and porosity based on the performance of a zero-gap alkaline water electrolyzer (AWE) cell
PhD Research Fellow at the Department of Mechanical Engineering and Maritime Studies, Western Norway University of Applied Sciences,5063 Bergen, Norway
- Blockage prediction in multiphase flow with cohesive particles using machine learning
- CFD of a Flow Conditioning Unit
Eindhoven University of Technology
- Experimental Study on Sticking Behavior during Iron Oxide Reduction for the Metal Fuel Cycle.
Master's degree in Metallurgical Engineering, major in industrial furnace technology
PhD in industrial furnace technology
Group manager for combustion and burner technology at the Department for Industrial Furnaces and Heat Engineering (IOB) since 2019
Research associate at IOB from 2015 to 2019
- CFD Simulation of Natural Gas and Hydrogen Oxyfuel Combustion: Comparison of kinetic mechanisms, combustion mechanisms and WSGG radiation models
- Comparison of dimethyl ether and natural gas combustion in a swirl-stabilized industrial burner using CFD simulations
- Development of a CFD model for a gas-lift chemical reactor
Flow Technology Group, Department of Process Technology, SINTEF Industry
- Multiphase flow dynamics in mini-channels used in water electrolysis
Department of Chemical Engineering, Faculty of Science and Engineering, University of Groningen
Nijenborgh 4, 9747 AG, Groningen, the Netherlands
- Surfactant-Polymer Interactions in a Combined Enhanced Oil Recovery Flooding
Equinor
- CFD of a Flow Conditioning Unit
Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU)
- A Comparative Study of Different CFD-codes for Fluidized Beds
ArcelorMittal
- Prediction of mass transfer regimes in a steelmaking ladle.
Researcher at SINTEF multiphase flow laboratory
- Multiphase flow dynamics in mini-channels used in water electrolysis
- A particle scale model of charge and slurry behaviour in SAG mills including coarse particle breakage, attrition and slurry phase grinding and transport
Dr Peter Witt is currently the Research Team Leader of the CFD team in Mineral Resources. In his current role he manages and undertakes research, consulting work and model development in the area of CFD modelling for companies in the mineral processing, chemical processing, petroleum and power generation industries.
- Three Phase Modelling of a Coarse Particle Flotation Machine
Mintek, Randburg, South Africa
University of Stellenbosch, Stellenbosch, South Africa
- Computational modelling of electric arc behaviour in direct-current smelting furnaces using hydrogen as a reductant
- MultiMorph - A Morphology-Adaptive Multifield Two-Fluid Model
Helmholtz-Zentrum Dresden - Rossendorf
Institute of Fluid Dynamics
Bautzner Landstrasse 400
D-01328 Dresden
Germany
--
email: r.rzehak@hzdr.de
- Mass transfer in bubbly flows – Different configurations and varying bubble composition
Sadra Mahmoudi1, Mahdi Saeedipour2, Mark W. Hlawitschka1
1 Institute of Process Engineering, Johannes Kepler University
2 Department of Particulate Flow Modelling, Johannes Kepler University
E-mail: mark.hlawitschka@jku.at and sadra.mahmoudi@jku.at
- Single bubble dynamics under the influence of Marangoni force
Mrs.
- Computational Modeling of Plasma Jet
Simon Schneiderbauer
Department of Particulate Flow Modelling
JOHANNES KEPLER UNIVERSITY
Altenberger Strasse 69
4040 Linz
Austria
- CFD simulation of organic dust deflagration in a vertical channel
- A CFD-CPM model for the simulation of the fluidization of fine-grained ores
Università degli Studi di Napoli Federico II, Napoli, Italy
Sorbonne Université, Institut Jean Le Rond d’Alembert UMR 7190, F-75005 Paris, France
- Direct numerical simulation of mass transfer at the oil water interface in a model metallurgical ladle.
SINTEF Industry, Flow Technology Team, Department of Process Technology
- A pragmatism-based model of alumina distribution in industrial Hall-Heroult cells
- Keynote: Learnings from 40 year of working with CFD - Stein Tore Johansen
- Hydrodynamics Improvement of a Pelletizer Chamber Using Computational Fluid Dynamics
HZDR
- Numerical prediction of flow morphologies in horizontal feed pipes
Windesheim University of Applied Sciences, Professorship for Polymer Engineering, P.O. Box 10090,
8000 GB Zwolle, The Netherlands
- CFD analysis of ultrasonic vibrations in enhancing recycled polymer extrusion efficiency
Tata Steel Nederland
- Investigating Thermal Dynamics in Submerged Arc Furnaces through Numerical and Water Modeling
NORCE
- Modeling a pilot furnace for manganese alloys.
PhD student
Department of Applied Science and Technology (DISAT)
Institute of Chemical Engineering
MuSyChEn Research Group - MulMoPro Team
Politecnico di Torino
Corso Duca degli Abruzzi 24, 10129 Torino, Italy
email: yi.feng@polito.it
- Numerical Study on Transport of Respiratory Droplets in Ventilated Indoor Environments